Disable SIP ALG - Ubiquiti EdgeRouter
1. Log in to EdgeMax User Interface
1. The router default is set to 192.168.1.1
2. The default username and password: ubnt (Your IT admin likely updated the login credentials and default gateway IP address)
2.
Select System -> Conntrack -> Modules -> Sip -> Disable
- If your management interface is not available, you can perform this change from the command line by logging in, and then entering the following commands:
Related Articles
Disable SIP ALG - Ubiquiti EdgeRouter
Disabling SIP ALG for Ubiquiti EdgeRouter User Interface Log in to EdgeMax User Interface The router default is set to 192.168.1.1 The default username and password: ubnt (Your IT admin likely updated the login credentials and default gateway IP ...SIP ALG Issues with VoIP and why it should be disabled
SIP ALG should be disabled for Voiceware VoIP system. Please note that on many routers and firewalls SIP ALG is by default enabled. To find out if SIP ALG is disabled, please download the attached file for Windows. 1. Make sure the Windows machine is ...Disable SIP ALG on Fortinet-Fortigate Firewalls
By default, a new Fortinet Firewall has SIP ALG enabled, a protocol to help with the voice-over-IP systems. Most of the time, this protocol causes issues with many SIP service providers, so it is recommended to disable it. The process to do so is ...How to disable SIP ALG on SonicWALL Firewalls.
Consistent NAT Click on VoIP Click on Settings Set Enable consistent NAT to enabled Every other checkbox on this page should be unchecked as well. Click Accept Advanced Firewall Settings Click on Firewall Settings Click on Advanced Set Enable Stealth ...Disable Do Not Disturb and Call Forwarding on Yealink phone using configuration overrides
On several occasions you will encounter customers complaining that calls do not land on their desk phones and are being forwarded to an external number, for example, a mobile phone. Most of the time this is a human error where the user forwards his ...